[Control]
AuthorName=Robert Sheahan
CompanyName=Prolink Software
DateCreated=06/03/98
Description=Slower but initializes the QC-2000 automatically
BaudRate=4800
Parity=0
BitsPerByte=8
StopBits=2
FlowControl=1
NoOfChannels=1
Port=COM2
Phone=(860)659-5928
E-Mail=Prolink@ProlinkSoftware.com
GetString=
DelayTime=
InitString=QUIT{cr}QUIT{cr}QUIT{cr}QUIT{cr}QUIT{cr}{chr$,27}D1{chr$,27}5{cr}ENTER{cr}{chr$,27}D1{chr$,27}2{cr}2{cr}2{cr}ENTER{cr}2{cr}ENTER{cr}{chr$,27}D1{chr$,27}FINISH{cr}2{cr}2{cr}2{cr}2{cr}2{cr}2{cr}ENTER{cr}2{cr}ENTER{cr}2{cr}2{cr}2{cr}CANCEL{cr}{chr$,27}D1{chr$,27}FINISH{cr}2{cr}ENTER{cr}2{cr}2{cr}2{cr}2{cr}2{cr}2{cr}2{cr}2{cr}2{cr}2{cr}CANCEL{cr}{chr$,27}D1{chr$,27}FINISH{cr}FINISH{cr}
Parse=13
ParseLines 1=*{MoveFirst} {StartRead} {MoveTo,0,1, } {MoveRel,-1} {StopRead} {R*
ParseLines 2=*eadVar,User1}~{SetVar,Action,{if,{var,MoveWarn},1,0}}~{MoveFirst}*
ParseLines 3=* {MoveTo,0,1,.}~{SetVar,Action,{if,{var,MoveWarn},1,{Var,Action}}*
ParseLines 4=*}~{SetVar,Action,{if,{Compare,=,{UCase$,{var,User1}},ID:},1,{Var,*
ParseLines 5=*Action}}}~{SetVar,Action,{if,{Compare,=,{UCase$,{var,User1}},+T},*
ParseLines 6=*1,{Var,Action}}}~{SetVar,Action,{if,{Compare,=,{UCase$,{var,User1*
ParseLines 7=*}},-T},1,{Var,Action}}}~{MoveLast} {StopRead} {MoveAbs,4} {StartR*
ParseLines 8=*ead} {ReadVar,Actual}~{SetVar,Action,{if,{var,MoveWarn},1,{Var,Ac*
ParseLines 9=*tion}}}~{If,{Var,Action},,{MoveTo,0,2,.} {If,{var,MoveWarn},, {Se*
ParseLines 10=*tVar,ErrNum,2} {SetVar,ErrText,Angle measurements in  degrees min*
ParseLines 11=*utes seconds mode is not supported. Please switch to Decimal Degr*
ParseLines 12=*ees.}}}~{SetVar,MoveWarn,0}{MoveLast} {StopRead} {MoveAbs,15} {St*
ParseLines 13=*artRead} ~{If,{var,MoveWarn},, {ReadVar,Units}}*
Notes=7
NoteLines 1=*This script filters out lines beginning with ID:, +T, and -T. The*
NoteLines 2=* INIT string sets most of the requierd settings. Sets 32 col, Ang*
NoteLines 3=*le to DD, no form feed, no POE. You must set anything else includ*
NoteLines 4=*ing polar/cart, mm/in, RS232 settings, PreLIne / PostLine / PreFo*
NoteLines 5=*rm / PostForm. This script is slower than the "QC-2000 in 32 col *
NoteLines 6=*mode" script. The QC-2000 must be on bwfore you run the Spec Plan*
NoteLines 7=* for this to work.*