|
| 2.4.18
|
8/14/2002
|
|
OFFICIAL RELEASE!!!
|
|
| 2.4.19
|
8/14/2002
|
|
QC-CALC Real-Time - Display the dimension label in the
title bar as the mouse floats over each plot but only when the plots get really
small.
|
|
| 2.4.21
|
8/28/2002
|
|
|
Real-Time Exporting - Added default file name for exporting
|
|
|
Sheffield MeasureMax - Calculate the Plus Tol when MMC is
in use with True Position features
|
|
| 2.4.22
|
8/29/2002
|
|
|
Real-Time Export to Q-DAS - Added default values to Q-DAS
output properties
|
|
| 2.4.25
|
9/12/2002
|
|
|
Nikon - The Nikon Lot number is taken from the Result - Lot
Names on the Run Teaching File window and put into Text Factor 1 in QC-CALC.
|
|
|
General - Close QC-CALC if we do not have full read/write
access to Windows directory or our own program directory.
|
|
| 2.4.26
|
9/24/2002
|
|
|
QC-CALC SPC - Change Cp calculation when single-sided
tolerance. We now report Cp = (USL - LSL) / 3 instead of dividing by 6.
|
|
|
Brown & Sharpe PC-DMIS - Adjusted our file parser to
read PC-DMIS release 3.5 file format.
|
|
| 2.4.27
|
9/24/2002
|
|
Starrett Apogee - Added support for Starrett's CMMs
|
|
|
SIP WiniSip - Added support for SIP's CMMs
|
|
| 2.4.29
|
9/26/2002
|
|
OGP - The MeasureMind and MeasureX labels in Automatic
Configuration mode were not used. This is fixed.
|
|
| 2.4.30
|
10/02/2002
|
|
|
QC-CALC Real-Time - Added password protection to the
Real-Time Plots instead of setting from Main Menu.
|
|
|
QC-CALC Real-Time - Machine Help files would not display if
menus were not visible.
|
|
| 2.4.31
|
10/09/2002
|
|
|
QC-CALC Real-Time - Added Cr = 1/Cp calculation to the
Real-Time Plots
|
|
|
OGP - Templates were not being set consistently between
MeasureMind and MeasureX for Automatic Configuration mode.
|
|
|
Zeiss Calypso - File read could fail if the HDR file was
not yet present when reading the CHR file.
|
|
|
LK - Fixed the file read where we did not know the data
record could contain an extra element if the feature is out of spec
|
|
| 2.4.33
|
10/16/2002
|
|
|
Real-Time Exporting - Added multiple extension types for
any exporting file format. Previously, each format was fixed to one type.
|
|
| 2.4.34
|
10/24/2002
|
|
|
Apogee Design - Inspection Workstation system parser added
|
|
|
Real-Time Exporting - When Exporting data there were
inconsistencies in the amount of dimensions that were included. You can now
choose between All Dimensions in the File vs. All Dimensions Displayed.
|
|
|
OGP - Fixed DBSWITCH feature so it doesn't report a bad
serial number when used with MeasureMind or MeasureX.
|
|
| 2.4.35
|
10/30/2002
|
|
|
File - New - When manually creating a database if you
selected the Don't show me this form again you were unable to manually
create another file. This is fixed.
|
|
| 2.4.36
|
10/31/2002
|
|
|
Gage R&R - Made Part, Trial, & Operator whole
numbers in Gage R&R
|
|
| 2.4.38
|
11/4/2002
|
|
|
QC-CALC Real-Time - Drift Trend occasionally indicated a
positive trend when the trend was actually negative
|
|
| 2.4.39
|
11/11/2002
|
|
|
Brown & Sharpe's Blade - Added support for Blade data
format and the ability to select the Source File Path & Name for it
|
|
|
Real-Time Reporting - Added .HTML to the list of
good extensions for reporting to file. We only had .HTM prior
|
|
|
Import ASCII - We were showing an extra screen that may
have been confusing to the user. We added a check box that lets you choose if
the records can span multiple lines. Now we assume that one line contains one
record.
|
|
| 2.4.40
|
11/15/2002
|
|
|
Brown & Sharpe's Blade - During installation we now
look for Blade on all drives.
|
|
|
Sheffield MeasureMax - The reading the CSV file format of
old and new formats was changed. We only allowed 1 trace (factor) in the new
format but we now allow up to 15,
|
|
|
QC-CALC Real-Time - The Point Properties window would not
show the dimension details when the mouse moved over an empty area (no data).
This has been changed to show the details all the time.
|
|
|
QC-CALC Real-Time - There were problems reading an
inspection results file that was marked as Read Only. This is now fixed.
|
|
| 2.4.42
|
11/26/2002
|
|
|
OGP Auto Configure Mode - The User inputs are now added to
the database as text factors. QC-CALC saves the inputs so it can regenerate SmartReport
reports on stored data.
|
|
| 2.4.43
|
12/04/2002
|
|
|
OGP - Added better error handling when the OGP output
templates cannot be accessed.
|
|
| 2.4.44
|
12/05/2002
|
|
|
QC-CALC Installation - Improved the method of installing
new versions of QC-CALC over old copies by remembering the previous settings.
|
|
| 2.4.45
|
12/06/2002
|
|
|
QC-CALC Real-Time - The number of points in the Real-Time
Plots was not remembered when you left the program. This is fixed.
|
|
| 2.4.46
|
12/11/2002
|
|
|
OGP - Improved the method of modifying the configuration
files to eliminate any chance for a file access error.
|
|
|
QC-CALC Real-Time - Made the Real-Time status screen taller
so the user can read the entire status without having to scroll.
|
|
|
QC-CALC Real-Time - Fixed a problem in which we might
falsely report an incorrect serial number in the status screen.
|
|
|
OGP ScanX - The file format changed so we adapted to the
new output. QC-CALC is compatible with ScanX versions 6.2 and 6.3.
|
|
|
QC-CALC Real-Time - When the Point Properties screen
is displayed and the mouse floats over a whisker plot, occasionally we reported
a Subscript Out of Range error. This problem was inadvertently introduced in
version 2.4.40. This is fixed.
|
|
| 2.4.47
|
12/18/2002
|
|
|
Brown & Sharpe Blade - The Brown & Sharpe Blade
program outputs data in a file that we read. We are obtaining the part name
found within this file which better describes the part program. This name is
obtained from the .CSV file in record #3.
|
|
| 2.4.48
|
12/23/2002
|
|
|
QC-CALC Real-Time - Relaxed the error reporting when
inspection data for a single part is received in multiple files. We were
reporting a Data File format not recognized which was not the case.
|
|
|
QC-CALC Real-Time - We now Auto Claim a file during data
collection.
|
|
|
Ekra - The file read logic that reports potential errors in
the file format occasionally reported an erroneous error. This is fixed.
|
|
|
Import ASCII - Displayed spaces in the Nom line.
This is fixed.
|
|
|
Assign Files - When you try to Assign the ownership of a
read-only file we displayed an error. This is fixed.
|
|
| 2.4.49
|
12/31/2002
|
|
|
Real-Time Export to Q-DAS - Q-DAS Non-Measurement data now
gets picked up from our text factors if the user has set a link between a
factor and a catalog.
|
|
|
QC-CALC Real-Time - ISO tolerancing was not handled
correctly (poorly scaled plots) when the plus and minus tolerance had the same
sign (+/+ or -/-). We now scale the plots correctly.
|
|
|
QC-CALC Real-Time - An error was reported when you delete
the active file if the plots were zoomed to large scale. This is fixed.
|
|
| 2.4.50
|
1/7/2003
|
|
|
Real-Time Reporting - Added a new variable called
'Num_Fails' or Number of Fails to the First Article Report. This allows you to
print the number of bad features in the report without having to count them.
|
|
| 2.4.51
|
1/9/2003
|
|
|
Real-Time Reporting - Sent CpR, CpS, CpkR, CpkS, CpkRL,
CpkRU, CpkSL, CpkSU, SigmaR, and SigmaS to Stat Summary Report.
|
|
|
File Create - Occasionally, when the Plus and Minus
tolerances equal 0 and the regional settings were in European (decimal symbol
is a comma) we would not create the QC-CALC file correctly. This has been
fixed.
|
|
| 2.4.52
|
1/17/2003
|
|
|
Real-Time Reporting - Added a text graph to the First
Article report showing the position of the actual value relative to its upper
and lower specification limits. The spec limits are broken into approximately
15% bands and an asterisk is placed in the graph showing its approximate
position based on the magnitude of the number.
|
|
|
Mitutoyo QuickVision - Changed the method of saving Trace
values coming from the machine. If an equal sign (=) is present in the text we
use everything left of the equal sign as the label and everything to the right
side as the value. This is for special applications only.
|
|
| 2.4.53
|
1/23/2003
|
|
|
OGP - When QC-CALC adjusts MeasureMind statistics output
templates it caused an unexpected error when run the first time on a new
installation. This has been fixed.
|
|
|
QC-CALC Real-Time - Displaying the Authorization Window or
the Password Window from Real-Time Plots when Always on top is selected
could cause the form to be covered and inaccessible. This has been fixed.
|
|
| 2.4.54
|
2/11/2003
|
|
|
QC-CALC Real-Time - Added New Trend - Consecutive Points
moving up or down.
|
|
|
Real-Time Exporting - Can now send Nominals and Tolerances
to Excel and Access in the first three rows.
|
|
|
Real-Time Export to Q-DAS - No longer requires the QC-CALC
database to contain 2 Text Factors.
|
|
|
Polar - Changed the QCC file name to the internal Part
Number contained in the .CLF file. Also changed the feature labels to the text
found in Layer and Description.
|
|
|
Polar - Added the ability to read subfolders when looking
for the *.CLF files
|
|
| 2.4.55
|
2/14/2003
|
|
|
Gage R&R - Added Bias calculation to GR&R and we
continue processing GR&R report even if the Part Variation = 0.
|
|
|
QC-CALC Real-Time - Removed Auto-Claiming when entering
Real-Time Plots if your copy of QC-CALC does not own the file. It now asks if
you want to claim the file.
|
|
|
Polar - Removed Polar Serial Number from locking system. We
now use Crypkey.
|
|
|
Polar - Polar - When reading the Polar inspection file the
last result contained today's date instead of the date of inspection.
|
|
| 2.4.57
|
2/21/2003
|
|
|
QC-CALC Real-Time - Optimized the file read to display data
faster.
|
|
| 2.4.58
|
2/27/2003
|
|
|
QC-CALC SPC - When the Sigma calculation by R equals zero
we occasionally reported an error. This has been fixed.
|
|
|
QC-CALC SPC - Could not exit the Historical Configuration
screen when the OK button is clicked. This has been fixed.
|
|
|
Polar - Fixed the serial number value to be saved as text.
We were attempting to convert text into a numeric value. It now stays as text.
|
|
| 2.4.59
|
2/28/2003
|
|
|
OGP - Added Flip Fixture support. This is a special method
of reorganizing the inspection results when inspecting a single side of several
parts before flipping the part over to continue on another side(s).
|
|
| 2.4.60
|
3/3/2003
|
|
|
Information Gathering - Some versions of Windows did not
report the correct information when menu option Help - Gather QC-CALC
Information was selected from the main QC-CALC menu. This is fixed.
|
|
|
Real-Time Reporting - When the automatic reports are in use
and you select Print Automatic Report Now, the report counter was not
reset. This could cause extra part data to be in the report. This is fixed.
|
|
| 2.4.61
|
3/10/2003
|
|
|
DEK Screen Printers - Added support for DEK Screen Printer
dongle to license QC-CALC when this option is enabled. This is for DEK
customers only.
|
|
| 2.4.62
|
3/18/2003
|
|
|
QC-CALC Real-Time - Changed the precision calculation on
the Point Properties. If a precision of a dimension is set to 7 places to the
right of the decimal point and the Point Properties is displayed, we reported
an error. This is fixed.
|
|
|
Nikon - Added the Nikon EMAX software interface. This is a
new software sold by Nikon for their manual inspection machines.
|
|
|
Romer - Added Romer's PowerINSPECT software to the list of
machines that QC-CALC supports.
|
|
| 2.4.63
|
3/21/2003
|
|
|
GR&R Fill - Changed minimum fill value to 5 in the fill
GR&R menu option found in the Edit - Data - Edit menu. We changed the
minimum number of parts required in a study but forgot to update this handy
fill option.
|
|
|
Real-Time Reporting - Could not print multiple copies when
printing multi-plot type reports. This is fixed.
|
|
| 2.4.64
|
4/3/2003
|
|
|
General - Added option to create sub-folders in common
dialog.
|
|
|
OGP Auto Configuration Mode - When running in Automatic
Configuration Mode (SmartReport) we now add the OGP header values to our
Factors instead of throwing them away.
|
|
|
IMS CMM - Changed IMS parser to treat feature types of
FLAT, CIRLTY, CYLCTY, STRGHT differently. These 4 features saved their upper
tolerance in the 3rd argument instead of the 4th. These are all treated as
single-sided tolerances.
|
|
|
Real-Time Reporting - The Real-Time PT Ratio report
template had the wrong variable set for Lower Spec Limit. This is fixed.
|
|
|
GR&R d2Star Table - Updated the d2 Star table to
the latest version found in the AIAG manuals. This provides slightly more
accurate answers and extends the table from 15 subgroups to 20.
|
|
| 2.4.65
|
4/8/2003
|
|
|
General - Changed the way we handle the Stat Summary report
when no variation exists in the data. We now report as much detail as possible
without dividing by 0.
|
|
| 2.4.66
|
4/10/2003
|
|
|
IMS Virtual DMIS - Added DIAM as a possible characteristic
to be analyzed. Previously, we only searched for DIA.
|
|
| 2.4.68
|
4/15/2003
|
|
|
License Screen - Display message to enter CD Key if its not
set when clicking on Site Key Request button.
|
|
| 2.4.69
|
4/21/2003
|
|
|
DEA Tutor - Added TP (True Position) as a possible
characteristic that we search for when reading the MEA files.
|
|
| 2.4.70
|
5/9/2003
|
|
|
Mitutoyo GEOMeasure CMM - Added the ability to read the
output file from Mode 5 of the Mitutoyo GEOMeasure software.
|
|
|
GR&R Fill - The automatic factor fill in the Edit -
Data - Edit menu would not allow you to start at 5. This is now fixed.
|
|
|
Zeiss Calypso - Added user defined Factors coming from
Calypso file. Any value starting with (U_) is considered User Defined. We now
add these to our database.
|
|
|
General - If any text does not fit a QC-CALC form or
button, it is chopped and an ellipsis is added to the end of the word. Floating
the mouse over the shortened word pops up the complete message. This was needed
to fit large German words on our forms.
|
|
| 2.4.72
|
5/20/2003
|
|
|
OGP - We no longer set OGP's BAD_VALUE_DIGIT to 9. This was
used to determine missed features and mark them as 99999. This feature caused
too many other problems so we simply save the reported value in our database.
|
|
|
Real-Time Static Factors - The Static Factor values found
in the Options menu are used to save trace fields with the inspected results.
The labels for these extra Factors are editable and are saved when a new part
is received from the machine. We have added a button to 'Save Labels' which
saves the labels in the database when the button is pressed.
|
|
|
Real-Time Calculations - Added the Sigma value to the list
of items available for display on the Real-Time Plots. You can now select
between Cpk, Cp, Cr, Avg, Range, Avg & Range, Sigma or none.
|
|
|
Real-Time Zoom - Added the value of each displayed Sigma
line on the Real-Time Plots when the plots are zoomed.
|
|
|
Real-Time Export to Q-DAS - Fixed displaying Q-DAS form
when Always On Top is selected.
|
|
|
General - Office copies now allow you to view Real-Time
Plots with some restrictions.
|
|
| 2.4.73
|
5/28/2003
|
|
|
OGP Auto Configuration Mode - Automatic Configuration Mode
now restores the original SmartReport Plus templates when Real-Time Plots
closes.
|
|
|
Real-Time Exporting - Changed the exporting format name
from MicroVu to Lighthouse SPC.
|
|
|
Password Protection - Made the Password Protection utility
work correctly with both Main Menu and Real-Time Plots.
|
|
|
Real-Time Plot Properties - The Normal value reported on
the Plot Properties screen is now reported as Yes, No, or No Variation rather
than 1, 2, or 3.
|
|
| 2.4.74
|
6/05/2003
|
|
|
File Creation Default Values - Fixed the Restore Defaults
button so it works with the new minimum number of Factors allowed.
|
|
|
Modify Database Structure - You no longer lose ownership of
the file when you modify it.
|
|
|
Raw Data Report - Now sending the Nominal, Tolerances, and
Precision for Numeric Factors to the Raw Data Reports in Edit - Data and
Real-Time Plots.
|
|
|
Real-Time Trend Analysis - Improved the combo boxes on the
Trend Analysis form so they automatically adjust when you change values.
|
|
|
File - Merge - Improved the message that appears when all
of the columns of the files you are trying to merge do not match.
|
|
|
Sheffield MeasureMax - We now handle the changed file
format from the new version of MeasureMax.
|
|
|
Real-Time Exporting - When exporting to Access with
Nominals and Tolerances included for the first time, there were problems that
the table was not ready on time for receiving the rest of the data. This has
been fixed.
|
|
| 2.4.75
|
6/16/2003
|
|
|
QC-CALC Real-Time - Add an optional Range Chart to the
Real-Time Plots if the Subgroup Size is greater than 1.
|
|
|
Real-Time Exporting - Added the ability to export to Access
with the dimensions in rows and the Nominals and Tolerances are also included
for both Access and Excel in this format.
|
|
|
Password Protection - A few of the Edit - Data - Filters
menu choices were being disabled incorrectly with the Password Protection
enabled in that area.
|
|
|
Real-Time Point Properties - Sometimes the wrong feature
labels were displayed in the Point Properties screen if some features were
hidden. This has been fixed.
|
|
|
Real-Time Reporting - Removed the limit of 100 data points
in the reporting area of Real-Time Plots. You can now report on as many records
as are in the file.
|
|
| 2.4.76
|
6/20/2003
|
|
|
OGP - Changed the way we check the OGP Stat templates to
handle the repeated values that can sometimes be in the templates for
SmartCheck.
|
|
|
Etamic - The Etamic interface has been added to QC-CALC.
|
|
|
Password Protection - Fixed how the toolbar in Real-Time
Plots was being disabled when the corresponding menu items were disabled.
|
|
| 2.4.77
|
6/30/2003
|
|
|
Starrett Apogee - There were some cases where QC-CALC may
not read the output, but the software driver has now been fixed.
|
|
|
Nikon EMax - There were some cases where QC-CALC may not
read the output, but the software driver has now been fixed.
|
|
|
Real-Time Reporting - There was a problem with choosing the
Multi-Piece First Article Report from the Report - Edit Report Schedule or File
- Print menus. The problem has been fixed.
|
|
| 2.4.78
|
7/02/2003
|
|
|
Brown & Sharpe PC-DMIS - Changed the method of reading
the PC-DMIS file when True Position is used. The Bonus Tolerance has now been
added to the Plus Tolerance and the Minus Tolerance is now 0.
|
|
|
QC-CALC Real-Time - An option has been added to place a dot
on each data point on the lines on the plots in order to more clearly see where
each individual point is.
|
|
| 2.4.79
|
7/09/2003
|
|
|
Real-Time Exporting to Q-DAS - Fixed a memory leak with the
Q-DAS interface form and changed the date being sent to Q-DAS to reflect the
time each record was received.
|
|
|
Real-Time Reporting - An option has been added to report
after a certain number of parts has been received, but only if at least one of
those parts received was either Out of Control or Out of Tolerance.
|
|
|
GR&R Study - The choice has been added to choose
between 5.15 and 6.0 as a sigma multiplier in a GR&R study. The 5.15
represents 99% of 'full' spread of measurement error while 6.0 represents
99.73%.
|
|
| 2.4.80
|
7/21/2003
|
|
|
Real-Time Exporting to Q-DAS - Changed Q-DAS to Append
only, no more File1.dfx, File2.dfx etc.
|
|
|
Brown & Sharpe - Added driver for Brown & Sharpe
Reflex Gage2000 CMM
|
|
| 2.4.81
|
7/24/2003
|
|
|
Real-Time Reporting - The type of Print Range was not being
saved correctly in some in instances. This is fixed.
|
|
| 2.4.82
|
7/29/2003
|
|
|
Sheffield MeasureMax - Added DBSWITCH to CSV file format.
This means you can add a UK command to tell QC-CALC to use a different file
name. More details in manual.
|
|
| 2.4.83
|
8/04/2003
|
|
|
Real-Time Reporting - The Real-Time Print-On-Exception can
now occur when the Real-Time Subgroup average exceeds the control or tolerance
limit. You can still Print-On-Exception if individual points excess these
limits.
|
|
| 2.4.84
|
8/21/2003
|
|
|
Polar - Added a special INI flag that creates an extra QCC
file based on the PART + JOB number when the flage is set to 1. This allows
users to separate real-time data based on JOB number and collect all PART data
into another complete file for off-line analysis.
|
|
|
Sheffield MeasureMax - Added another DBSWITCH method when
reading the RTL file. Using the UK statement this pipe delimited string was
needed since the largest database value MeasureMax allows is 20.
|
|
| 2.4.85
|
8/22/2003
|
|
|
German - Automatically use the new German help file if
QC-CALC is displaying German messages.
|
|
|
QC-CALC Real-Time - Fixed a problem with displaying Whisker
plots.
|
|
|
QC-CALC Real-Time - Fixed a problem with automatic
reporting from Trend Analysis.
|
|
| 2.4.86
|
8/26/2003
|
|
|
General - Now include the Operating System and User
information in the file created by Help - Gather QC-CALC Information.
|
|
| 2.4.87
|
9/17/2003
|
|
|
QC-CALC SPC - Removed the AIAG template folder after making
the default templates show the AIAG calculations also.
|
|
|
QC-CALC SPC - Now sending the Cp by R and Cpk by R
calculations to all templates where those calculations statistically make
sense. Default reports now show both Cpk by R and Cpk (Cpk and Ppk for AIAG
companies).
|
|
| 2.4.88
|
9/23/2003
|
|
|
General - Added a Limited Use Mode so that the program will
continue to run even after the demo period has expired. This mode will only
show the first 4 dimensions and limits the file to 25 records.
|
|
| 2.4.89
|
9/25/2003
|
|
|
Real-Time Reporting - Added an option to the Automatic
Reporting to create a unique filename when printing to file. This name is the
Part Name and the Date and Time the report was created.
|
|
|
Real-Time Reporting - Fixed a bug where the values for the
range of records to print was not being remembered.
|
|
| 2.4.90
|
9/26/2003
|
|
|
QC-CALC Real-Time - Fixed displaying the Change Plot Colors
form.
|
|
| 2.4.91
|
9/29/2003
|
|
|
General - Added another way to input Command Line values in
case permission to change Desktop or Start Menu items is disabled.
|
|
|
Real-Time Reporting - Added the ability to remember the
report counter for each individual part, even when switching parts.
|
|
|
Real-Time Reporting - Fixed file extension problems when
using the Print to File - Unique File Name option.
|
|
| 2.4.92
|
10/02/2003
|
|
|
QC-CALC Real-Time - Fixed a bug when trying to assign the
template to use for the Reporting in Trend Analysis.
|
|
|
Brown & Sharpe's Blade - Fixed saving the path for the
BladeRunner interface.
|
|
|
QC-CALC Real-Time - Changed the color of the No File is
Active screen to the In Control color (Green).
|
|
| 2.4.93
|
10/03/2003
|
|
|
Real-Time Exporting - Added an option to the Automatic
Exporting to create a unique filename when exporting. This name is the Part
Name and the Date and Time the file was created.
|
|
|
General - Fixed a bug when using Help - About QC-CALC from
the License Configuration screen.
|
|
|
QC-CALC Real-Time - Fixed a bug that would happen when
printing a Plot Report with at least one Whisker Plot and Trend Analysis not
enabled.
|
|
| 2.4.94
|
10/10/2003
|
|
|
Real-Time Reporting - Added variables Start_Date and
End_Date to the reports that reflect multiple records (5 Piece, Stat Summary,
and Gage Reports).
|
|
|
QC-CALC Real-Time - The range was being calculated from
oldest record instead of newest.
|
|
|
Real-Time Exporting - Added Access 2002 as an exporting
choice.
|
|
|
QC-CALC Installation - If no machines are detected the type
will default to an Historical Analysis copy instead of a Gage Central copy.
|
|
|
QC-CALC Installation - Copy only the English or German
manual to the hard drive depending on which language was chosen during the
install process.
|
|
|
Real-Time Exporting - Added the ability to remember the
values of the automatic counters for reporting and exporting when you change
files.
|
|
| 2.4.95
|
10/22/2003
|
|
|
Real-Time Reporting - Real-Time Subgroup size is now being
sent to the StatSummary Report and is used to calculate Cpk, Cpk_R, and Cpk_S.
|
|
|
Real-Time Reporting - QC-CALC now handles a single sided
tolerance correctly for Cp and Process Spread.
|
|
|
QC-CALC SPC - Fixed a problem with Cp in the Histogram
report.
|
|
|
Real-Time Reporting - Fixed a problem with the Cp_R
calculation in the Real-Time Stat Summary report.
|
|
|
QC-CALC SPC - Fixed a problem in the GR&R report when
deleting outliers and not enough data was left to run the calculations, all
other dimensions used to be skipped also.
|
|
|
IMS - Added a special Factor format to the IMS file read.
|
|
| 2.4.96
|
11/06/2003
|
|
|
QC-CALC Real-Time - QC-CALC now updates the Real-Time Plots
with the newest data before automatically asking for an Assignable Cause or
Corrective Action to be entered.
|
|
|
General - Found the few menus without help associated and
fixed them.
|
|
|
Real-Time Reporting - Fixed the User Inputs being sent to
the Stat Summary report.
|
|
|
QC-CALC SPC - Made cosmetic changes to the Filtering form.
|
|
|
Real-Time Exporting - VisualSPC - Improved the interface
for VisualSPC.
|
|
|
General - Fixed some problems with missing DLLs for the
locking.
|
|
|
QC-CALC SPC - Fixed a problem with the Last Written Record
after using File - Merge and Synchronize.
|
|
|
Romer - The 2 Romer files necessary for output are now
copied to the hard drive at install time.
|
|
| 2.4.97
|
11/10/2003
|
|
|
QC-CALC Real-Time - Fixed a bug that happened when trying
to use Static Factors when some Automatic Factors were already enabled.
|
|
|
QC-CALC SPC - Added the option to Use Saved Mean separately
from Use Saved Control Limits.
|
|
| 2.4.98
|
11/14/2003
|
|
|
General - Do not ask to claim files during the File - Open
process if the File - Claim menu is password protected.
|
|
| 2.4.99
|
11/18/2003
|
|
|
Romer - Added Romer to the install program.
|
|
|
General - Changed the default number of records used to
create a new file from 300 to 10,000.
|
|
|
QC-CALC Real-Time - Changed the maximum number of plots to
display from 500 to 600.
|
|
| 2.4.100
|
11/19/2003
|
|
|
QC-CALC Real-Time - Some menus were not disabled that
should have been in Real-Time Plots if a Manual (QC-CALC SPC) copy was
installed.
|
|
| 2.4.101
|
11/26/2003
|
|
|
QC-CALC Exporting - Default to Excel 97/2000/2002 if we
receive a type of Excel that does not match any other Excel type in our list.
|
|
|
QC-CALC Real-Time - Added the specific file name for each
error when logging the errors to a file.
|
|
|
QC-CALC Exporting - Enabled a few new options on the
Exporting schedule screen when using Automatic Configuration Mode.
|
|
| 2.4.102
|
12/01/2003
|
|
|
General - Changed the QC-CALC serial number that owns the
sample files shipped with QC-CALC to a demo serial number for easy file
claiming.
|
|
| 2.4.103
|
12/03/2003
|
|
|
QC-CALC Real-Time - Fixed the values for Actual and
Deviation in the Point Properties window when the plots are really small. The
values didn't update when the mouse moved before.
|
|
|
Real-Time Reporting - For Print to File you can now
type the file name in the text box and the correct format will be chosen
depending on the file extension given instead of having to use the Save As Type
area after hitting the Browse button.
|
|
| 2.4.104
|
12/10/2003
|
|
|
General Reporting - Added variables to many reports to show
the date of the first and last record used in the report.
|
|
|
QC-CALC Real-Time - Increased the precision by two digits
for Sigma and Range values on the plots.
|
|
|
Real-Time Exporting - Fixed a bug when using the Use Same
Exporting Settings and Use Part Name as Table Name features
together.
|
|
| 2.4.106
|
12/15/2003
|
|
|
OGP MeasureMind - Now able to handle the extra Carriage
Return that could end up in the report or export.sta files depending on the
version of MeasureMind being used.
|
|
|
Real-Time Exporting - Fixed a problem when Use Part Name as
Table Name and Use Same Settings for Exporting were used.
|
|
|
EKRA - Fixed the data path for EKRA.
|
|
|
Real-Time Exporting - Fixed a problem with exporting to any
format with the Use Part Name, Date, and Time feature.
|
|
| 2.4.107
|
12/16/2003
|
|
|
OGP MeasureMind - Now able to handle commas instead of
pipes that could end up in the report or export.sta files as delimiters
depending on the version of MeasureMind being used.
|
|
| 2.4.108
|
12/16/2003
|
|
|
Real-Time Exporting - Fixed a problem when exporting to
Prolink Standard Format when there were Text Factors in the file.
|
|
| 2.4.109
|
12/22/2003
|
|
|
Xspect OpenDMIS - Added the support for Xspect OpenDMIS.
|
|
|
Real-Time Exporting - Fixed a problem with exporting to any
format with the Use Part Name, Date, and Time feature.
|
|
| 2.4.110
|
12/29/2003
|
|
|
General - Help - Gather QC-CALC Information now
returns the language the operating system is using.
|
|
|
Real-Time Exporting - Fixed a problem with automatically
exporting to any format with the Use Part Name, Date, and Time feature.
|
|
|
Machines Help - Added the help for OpenDMIS and brought
other machine's help up to date with changes that had been made to the printed
gray sections.
|
|
| 2.4.111
|
01/06/2004
|
|
|
MeasureMax - Added a check to ensure we do not stop reading
an RTL file if the words PART PROGRAM are found in the file. If the words PART
PROGRAM are found in the first record we assume the file format is CSV.
|
|
|
Real-Time Exporting - Fixed a problem with automatically
exporting to any format with the Use Part Name, Date, and Time feature.
The filename verification used to trip on the *. part of the filename that was
necessary for this feature.
|
|
| 2.4.112
|
01/14/2004
|
|
|
QC-CALC Real-Time - Now handle receiving a part file with 0
dimensions inside better than before.
|
|
|
General - Fixed a problem if you assigned a Cause or
Corrective Action in a circular database and the database wrapped around and
overwrote the old data point. The Cause or Action would remain assigned to the
new data point.
|
|
|
General - Straightened out the tab order on the Edit Filter
Criteria form and a problem with saving changes to a filter when the group .qcf
file is Read-Only.
|
|
|
Real-Time Exporting - Exporting now follows the Dimensions
to Export correctly and does not export any points that have marked as
deleted.
|
|
|
Installation - Now follow the CD Key more closely during
the install process. If the Model in the CD Key is not found it is still shown
in the list and chosen by default.
|
|
| 2.4.113
|
01/21/2004
|
|
|
Real-Time Exporting - Added the ability to purge the
database after exporting the data automatically.
|
|
|
QC-CALC Real-Time - Handle the Whisker plots correctly when
a value is very far away from Nominal.
|
|
|
QC-CALC Real-Time - No longer attempt to display trends on
Scatter plots.
|
|
|
Machines Help - Fixed the help for DEK so a DEKW or DEK8
model would show the same Machine Help page as any other DEK models.
|
|
|
QC-CALC Help - The Save Limits form available from the
Control Charts now displays the correct help when you hit F1.
|
|
| 2.4.114
|
01/23/2004
|
|
|
Historical Reporting - Now sending the correct value for
each Subgroup Date and Time.
|
|
|
Real-Time Exporting - The new purging feature can now be
set to trigger after a different number of parts have been received than the
exporting trigger. For example, you can choose to export after every part is
received, but purge the database after 5 parts have been received.
|
|
| 2.4.115
|
01/27/2004
|
|
|
Zeiss U-SOFT - Added this new model to the list of
supported machines.
|
|
|
MPM - We now handle the new 3D inspection format.
|
|
|
Real-Time Exporting - Auto Exporting to ASCII would revert
to default values when a new part came in even though Use Same Settings was
enabled.
|
|
|
QC-CALC SPC - No longer allow the user to type negative
values for the Control and Plotting Limit percentages in the Edit - Nominals and
Tolerances window.
|
|
| 2.4.118
|
02/03/2004
|
|
|
QC-CALC SPC - The Subgroup Date and Time are now reported
in the subgroup table on the Individual & Range report.
|
|
|
QC-CALC Real-Time - Pass-Through data is now saved locally
when the destination path disappears (the network or server is down). When the
network is re-established, the saved Pass-Through data is automatically sent so
no data is lost.
|
|
|
MPM - Added a batch read for obtaining and analyzing the
machine diagnostic files.
|
|
|
Sheffield MeasureMax - The minus tolerance could be missing
a minus sign when reading the .CSV files. If the tolerances are different
(+0.002 / -0.001) we make them both positive.
|
|
| 2.4.119
|
02/12/2004
|
|
|
Historical Reporting - Fixed the Cpk calculation displayed
in the Historical Analysis portion of QC-CALC when there is a single sided
tolerance.
|
|
| 2.4.120
|
02/26/2004
|
|
|
Laser Mic - Added the Laser-View Laser Mic model to the
list of supported machines.
|
|
| 2.4.121
|
03/01/2004
|
|
|
QC-CALC Real-Time - Fixed a problem that occured if Range
Charts were turned on and the subgroup size was larger than the number of
points in the file.
|
|
| 2.4.122
|
03/04/2004
|
|
|
QC-CALC Real-Time - Added DBSWITCH to all machines that use
our Generic interface format. This allows the user to control the QC-CALC file
name they save their date to.
|
|
| 2.4.123
|
03/18/2004
|
|
|
MPM - Added the MPM2 and MPM3 model codes to support
Ultraprint 2000 and 3000.
|
|
|
Machines Help - Add the machine specific help for Zeiss
U-SOFT.
|
|
| 2.4.124
|
03/18/2004
|
|
|
MPM - Added support for the Ultraprint 3000.
|
|
|
VirtualDMIS - Added another feature type to read from the
MEA file.
|
|
|
Mitutoyo QuickVision - Adjusted the Stat Templates in the
registry to the correct values for QC-CALC.
|
|
|
PC-DMIS - Fixed the spelling that appeared in the Data
Collection Wizard.
|
|
| 2.4.125
|
03/26/2004
|
|
|
PC-DMIS - Stopped the warning when the part program
terminated early.
|
|
|
QC-CALC Real-Time - Increased the absolute maximum number
of Real-Time Plots that can be show from 600 to 1250.
|
|
| 2.4.126
|
03/29/2004
|
|
|
ZView - Added ZView Software as MSP and ZView Software as
DMP.
|
|
| 2.4.127
|
04/14/2004
|
|
|
OpenDMIS - Switched the location of Actual and Nominal when
reading the OpenDMIS files.
|
|
| 2.4.128
|
04/29/2004
|
|
|
QC-CALC Real-Time - Added the option for displaying the
date and time for each record on the Real-Time Plot report and in metafiles.
|
|
| 2.4.129
|
05/03/2004
|
|
|
QC-CALC Real-Time - Adjusted the size of the date and time
printed on the Real-Time Plot report.
|
|
| 2.4.130
|
05/04/2004
|
|
|
General - Added the Site License capabi |