|
| 3.0.290
|
06/18/2008
|
|
QC-CALC Real-Time - Fixed an error that happened sometimes
when turning off TryOut Mode.
|
|
| 3.0.289
|
06/18/2008
|
|
|
Real-Time Reporting - Fixed an issue that happened if you
chose to print a Plot Report with the Don't Display Deleted Points option enabled.
|
|
|
General QC-CALC - Fixed an issue where the calculations for
Calculated Dimensions were not being saved correctly if they were too long.
|
|
| 3.0.288
|
06/10/2008
|
|
Nikon NEXIV/iNEXIV - Added the Nikon NEXIV/iNEXIV horizontal
CSV driver.
|
|
|
ASDQMS Genesis 1000 - Added the new ASDQMS Genesis 1000 driver.
|
|
OGP MeasureMind - Finished up the driver for MeasureMind
versions 13 and higher.
|
|
|
Metris CAMIO (.RES) - Fixed an issue in the Metris RES driver
where Surface measurements were always 0.00.
|
|
| 3.0.287
|
06/06/2008
|
|
|
OGP MeasureMind - Added a new model for OGP MeasureMind
version 13 and higher to use. This will handle the different output format of the
User Inputs in version 13 of MeasureMind.
|
|
|
Real-Time Reporting - Added a new field for "Record Report
Position" to the Raw data report.
|
|
|
QC-CALC Real-Time - Fixed an issue with the Trend Analysis
test for a single point when the feature was Single-Sided.
|
|
| 3.0.286
|
06/02/2008
|
|
|
Q-DAS Exporting - Q-DAS KFields K0001 - K0099 in the .dfx file
now get the "/0" after them so that they will apply to all features in Q-DAS.
|
|
|
QMD - Changed the QMD driver to handle different implementations
of this "standard" that were created by other companies.
|
|
|
QC-CALC Real-Time - The color of the Value in Point Properties
now follows the settings for Single-sided tolerances in the INI file.
|
|
|
QC-CALC Real-Time - Persistent Factors would not work if the
file name changed case (was all capitals and changed to lowercase for example).
|
|
| 3.0.285
|
05/16/2008
|
|
|
QC-CALC Reporting - 25 parts are now always sent to the
Multi-Piece First Article report instead of only sending exactly what is needed.
|
|
|
Metris CAMIO (.CSV) - Metris CSV driver can now handle blank
lines in the output file.
|
|
|
Metris CAMIO (.RES) - Changed Metris drivers to read
Factors on two different records and added the ability to read Degrees:Min:Sec.
|
|
| 3.0.284
|
05/14/2008
|
|
|
Mitutoyo FormPak - Added the Mitutoyo FormPak driver.
|
|
|
Cleco DC Gun - Added the Cleco DC Gun driver.
|
|
|
DMIS 5.0 - Added the ability to receive factors from
the DMIS 5.0 driver.
|
|
| 3.0.283
|
04/28/2008
|
|
|
General Filtering - Fixed an error that happened when
creating a Filter using the "Time Only" option.
|
|
| 3.0.282
|
04/15/2008
|
|
|
Zeiss UMESS - Changed the UMESS driver to accomodate
the STRATA format and added a special property for the UMESS driver to only
save features that are tagged as STRATA format.
|
|
| 3.0.281
|
04/11/2008
|
|
|
MicroVu InSpec - Fixed an issue with Text Factors in
the MicroVu driver.
|
|
| 3.0.279
|
04/07/2008
|
|
|
Oasis - Added the interface for the Oasis machine.
|
|
|
Mitutoyo GeoMeasure - The Mitutoyo GeoMeasure driver now
handles multi-line output and multiple parts within a single file.
|
|
|
Brown & Sharpe PC-DMIS - The PC-DMIS driver was changed
to ignore local computer settings for the date format since PC-DMIS only sends
the date out in US format.
|
|
|
Z-Mike - Fixed an issue with the Z-Mike driver that was
reporting a bad file name when the name was really fine.
|
|
| 3.0.277
|
03/28/2008
|
|
|
Xspect OpenDMIS - Added "TolZone" as a possible tag that
can be received in the file and fixed a flag that was causing factors to be
saved as dimensions.
|
|
| 3.0.276
|
03/25/2008
|
|
|
QC-CALC SPC - Dimension labels in a Group were made up
of the original Dimension Label with the QCC file names appended. The file name
will no longer be appended for the reporting and exporting, but will remain when
selecting which dimensions to use.
|
|
| 3.0.275
|
03/05/2008
|
|
|
QC-CALC Real-Time - PT Ratio was being calculated differently
in the reports vs. the Real-Time Plots for single-sided dimensions.
|
|
|
General QC-CALC - Fixed an issue that happened occassionally
when trying to delete a Value from a Factor List.
|
|
| 3.0.274
|
02/22/2008
|
|
|
Zeiss UMESS - Added the ability to specify which features
will be read from the UMESS file.
|
|
|
Sheffield MeasureMax - Changed the way we read the MeasureMax
ID record by trimming first character if it is a ~.
|
|
|
Real-Time Exporting - Added the Deviation column to CM4D output.
|
|
|
Real-Time Exporting - Fixed an issued that happened when the
first record in the file was deleted and the Last n Records was being calculated
incorrectly for Exporting.
|
|
|
QC-CALC Real-Time - The Trend Analysis Assignable Cause or
Corrective Action assigment when a point was Out of Control or Out of Tolerance had a
problem when multiple copies of QC-CALC were writing to the same file at the same time.
|
|
|
QC-CALC SPC - Merging records into a circular file did not
work correctly.
|
|
| 3.0.273
|
02/07/2008
|
|
|
Real-Time Exporting - Added a Ford CM4D exporting format.
|
|
|
QC-CALC Reporting - A new variable was added for all
dimensions in the reports for the Extra Dimension Information field.
|
|
|
Real-Time Exporting - Removed the Assignable Causes and
Corrective Actions from the PC-DMIS exporting.
|
|
|
Q-DAS Exporting - Fixed the date in Q-DAS export, added
additional data, and changed the delimiter used in the file.
|
|
| 3.0.272
|
02/04/2008
|
|
|
QC-CALC SPC - Fixed an issue with the Gage R&R report
where invalid Part-Trial-Operator combinations were reported even though they
were correct.
|
|
| 3.0.271
|
01/30/2008
|
|
|
Q-DAS Exporting - Extra KFields were adjusted, Katalog
file reading was improved, and fixed the output when there is no match in the
Katalog file.
|
|
| 3.0.270
|
01/28/2008
|
|
|
Q-DAS Exporting - Katalog file reading was improved.
|
|
| 3.0.268
|
01/16/2008
|
|
|
QC-CALC Real-Time - Added the ability to display the
current filter name in the title bar of QC-CALC Real-Time.
|
|
|
Metris CAMIO (.RES) - You can now change the delimiter
found in the header section of the RES file to whatever you want, specify the
QCC file name by using one of the header values, and send Factor Values to QC-CALC.
|
|
|
QC-CALC Real-Time - Fixed an issue where all the graphs
turned red due to the Decimal Separator in the Regional Settings not being a period.
|
|
| 3.0.267
|
12/27/2007
|
|
|
Real-Time Exporting - Set the default path for the VisualSPC
output.
|
|
|
Zeiss Calypso - All Factors for Calypso that were previously
being sent to Numeric Factor are now also being sent to the Text Factors.
|
|
| 3.0.266
|
12/12/2007
|
|
|
Real-Time Reporting - The Precison value for data
in the GR&R reports was being set to 0 instead of the real precision value
for each feature.
|
|
| 3.0.265
|
12/03/2007
|
|
|
DMIS 5.0 - Made improvements and refinements to
the DMIS 5.0 driver.
|
|
| 3.0.264
|
11/30/2007
|
|
|
Metris Focus Inspect - Added an interface
for Metris Focus Inspect.
|
|
|
DMIS 5.0 - Added an interface for DMIS 5.0.
|
|
| 3.0.262
|
11/15/2007
|
|
|
Real-Time Exporting - Added the exporting to
Proficy Shop Floor SPC (VisualSPC) functionality.
|
|
|
FARO CAM2 Measure - Added the interface for the
FARO CAM2 Measure software.
|
|
| 3.0.261
|
11/12/2007
|
|
|
Real-Time Exporting - More control of the file
locations was added for the Becker Quality Solutions Reaction Plan
Manager software.
|
|
|
QC-CALC Real-Time - Added the Lock Editing
button to the toolbar.
|
|
| 3.0.260
|
11/07/2007
|
|
|
QC-CALC Gage Central - The ~n~ Incrementing Factor
functionality was added to the QC-Gage data collection driver.
|
|
| 3.0.259
|
11/05/2007
|
|
|
Micro-Vu InSpec - Added the Flip Fixture capability
and the ability to accept a list of factor values to the Micro-Vu interface.
|
|
|
QC-CALC Real-Time - Increased the default Maximum
number of Plots from 500 to 1200.
|
|
|
Sheffield MeasureMax - Changed the way that labels
are constructed in the MeasureMax interface.
|
|
|
OGP MeasureMind - During the ReMeasure Record process
MeasureMind has an issue because it has problems surfacing on top of other
programs. When the "waiting for the new part" message is showing you cannot
get to MeasureMind to start running the part. The way the ReMeasure Record is
handled in QC-CALC has changed in order for MeasureMind to work correctly.
|
|
|
QC-CALC SPC - Deleted points/records were being
included in the QuickStats calculations.
|
|
| 3.0.258
|
10/26/2007
|
|
|
Real-Time Exporting - Added the ability to change the
install location of the Becker Quality Solutions Reaction Plan Manager software.
|
|
|
General QC-CALC - The new SMTP emailing functionality
was made into an option instead of being used all the time. This means the
previous MAPI emailing method can still be used.
|
|
| 3.0.256
|
10/23/2007
|
|
|
Real-Time Reporting - A new report type called Visual
Part Report was added.
|
|
|
QC-CALC Real-Time - Calculated dimensions with "#" in
their labels were not being calculated correctly.
|
|
|
QC-CALC Real-Time - Any exporting that occurred in
Automatic Configuration Mode was only exporting whole numbers.
|
|
| 3.0.255
|
10/15/2007
|
|
|
Data Collection - Added a new FactorNn.txt and
FactorTn.txt for general data collection.
|
|
|
General QC-CALC - Added the option of automatically
running the update as a different user.
|
|
|
MicroVu InSpec - If the measured value received is
null we now set it to nominal and mark it as deleted. If the entire part
has null Actuals then the part is marked as deleted.
|
|
|
Data Collection - Q-DAS batch number (K0006) no longer
requires the "#" to read in.
|
|
|
Metris CAMIO (.RES) - Made changes to this driver again.
|
|
|
Real-Time Exporting - Fixed a bug in the exporting
to an ASCII file.
|
|
| 3.0.254
|
10/10/2007
|
|
|
Marposs - Adjusted the native Marposs driver
to handle new information being sent.
|
|
|
Real-Time Exporting - Fixed an issue between
QC-CALC Real-Time and JMP after exporting the second time.
|
|
|
General QC-CALC - Fixed an issue when trying
to get run the Help - Run Update menu and the opposite side of the
program was already running.
|
|
| 3.0.253
|
10/03/2007
|
|
|
General QC-CALC - Added the ability to run the
update utility as a specific user that has administrative privileges. This
solves the issue of automatic updates for machines that do not typically
have admin users logged in.
|
|
|
QC-CALC SPC - Changed the sorting method used for
Dimension Labels to be a combination of numeric and text sorting. The numeric
parts of the labels will be sorted numerically in order to make the 9, 10, 11
order most people expect. The previous method did 1, 10, 11, 2,...
|
|
| 3.0.252
|
09/26/2007
|
|
|
General Reporting - A new email method was added
which does not use Outlook or Lotus to send the email. This stops the
questions that occurred when the reporting process would try to send the
email out.
|
|
| 3.0.251
|
09/21/2007
|
|
|
Real-Time Exporting - Added the ability to launch
Minitab 15 or StatGraphics XV when using the QMD Exporting type.
|
|
| 3.0.250
|
09/20/2007
|
|
|
Real-Time Exporting - Added WinSPC as an exporting
format.
|
|
|
Real-Time Exporting - Added ClassThree for QMD as
an exporting format.
|
|
|
Mahr MarWin - Changed the MarWin driver to use the
name of the TMP file for the name of the QCC file.
|
|
|
SPC Reporting - Users were not able to print any of
the Report - Other Reports when a group was active.
|
|
| 3.0.249
|
09/17/2007
|
|
|
Real-Time Exporting - Added the new QMD XML Format
to the list of supported exporting formats.
|
|
|
Real-Time Exporting - The Q-DAS KFields are now in
K#### numerical order in order to make the import into Q-DAS work correctly.
|
|
|
Mahr MarWin - Added the ability to read from
sub-directories in order to collect all the data from MarWin.
|
|
| 3.0.248
|
09/10/2007
|
|
|
General QC-CALC - Added a Dimension Source field for
each Dimension in the QCC File in order to hold the machine information for
that particular dimension.
|
|
|
Mahr MarWin - Added the interface for the Mahr MarWin program.
|
|
|
Asymtek - Changed the Asymtek driver and made it put new
data into the same .qcc file as last time, unless a new name was received in between.
|
|
| 3.0.247
|
08/29/2007
|
|
|
Real-Time Exporting - Added the factor values to
the JMP export.
|
|
|
QC-CALC Real-Time - Improved the Remeasure functionality
to handle partial records. This means just the missed value can be remeasured
and the feature labels will be matched up in order to get the new data in the
correct location.
|
|
|
General Filtering - Record filters with parenthesis
in them caused an issue.
|
|
|
QC-CALC Real-Time - When calculating specification limits
with the Subgroup Size greater than 1, the wrong Sigma value was being used in
the calculation.
|
|
|
QC-CALC Real-Time - The Source File Backup option
would copy the source files to the backup directory even if the file had not been
released by the inspection program or process by QC-CALC yet.
|
|
| 3.0.246
|
08/24/2007
|
|
|
QC-CALC Real-Time - Added the option for the record
numbers to be shown at the bottom of the graphs on the Plot Report and the
metafiles.
|
|
|
Real-Time Exporting - Added ability to append to the
JMP export file.
|
|
|
Real-Time Reporting - Deleted point values were not being
skipped when looking for values out of specification for the Stat Summary and Raw
Data reports.
|
|
| 3.0.244
|
08/20/2007
|
|
|
Romer PowerInspect - Added a driver for the XML format that
Romer PowerInspect can output.
|
|
|
Real-Time Exporting - The secondary exporting functionality
was not working if the Frequency of Exporting was set to Export on Exception.
|
|
| 3.0.243
|
08/13/2007
|
|
|
Asymtek - Added the Asymtek machine interface.
|
|
|
Metris CAMIO (.RES) - The RES file reader now watches
for TruePosition labels.
|
|
|
View VMS/Voyager - The DDE application used to tranfer
data from VMS now closes and does not complain if VMS or QC-CALC Real-Time is
shut down.
|
|
| 3.0.242
|
08/03/2007
|
|
|
Metris CAMIO (.RES) - Added LINE-PROFILE, for
SURF-PROFILE the larger of MAX - MIN is now reported, and the DBSWITCH
functionality was added.
|
|
|
General Reporting - Multi-Piece First Article
report was showing incorrect record numbers when Range of Records was
either Seleted or Newest in File.
|
|
|
QC-CALC Real-Time - Points falling exactly on
the Upper or Lower Spec Limits were sometimes being shown as Out of Spec.
|
|
|
QC-CALC Real-Time - Point Properties was comparing
formated point values to determine if a point was In or Out of Spec. This
led to some issues that have been fixed.
|
|
| 3.0.241
|
07/27/2007
|
|
|
QC-CALC Real-Time - Improved the error messages during the
Remeasure process.
|
|
|
Real-Time Reporting - When a record filter is applied the
Record Range value shown in the Plot Report was incorrect.
|
|
|
QC-CALC Real-Time - The Point Properties area was not
showing values with the correct Precison when the Subgroup Size was more than 1.
|
|
|
GR&R Wizard - Fixed an issue that happened when you stopped
a study, resumed the study, then resized the QC-CALC Real-Time screen.
|
|
| 3.0.240
|
07/24/2007
|
|
|
General Filtering - Added the Ask-Date-Range special
record filter. This will ask you to enter a start date and a stop date when
you choose this filter.
|
|
|
QC-CALC Real-Time - Fixed an issue that happened when
there was a trending filter applied and a trend occured in a dimension not
being displayed.
|
|
| 3.0.239
|
07/11/2007
|
|
|
QC-CALC Real-Time - Fixed an issue with Automatic Metafile
creation when all the dimensions in the file were used and made the None
choice work as it should at the same time.
|
|
| 3.0.238
|
07/05/2007
|
|
|
Real-Time Exporting - Added a new exporting format for SQL Server.
|
|
|
EuroTech SIKO - Added the interface for EuroTech SIKO.
|
|
|
MESAS VSM - Added the interface for MESAS VSM.
|
|
| 3.0.236
|
06/21/2007
|
|
|
QC-CALC Real-Time - Added the Anova method for the GR&R report.
|
|
|
QC-CALC Real-Time - Changed the K values used for the Average
and Range method for the GR&R report to follow the current MSA book.
|
|
|
QC-CALC SPC - Fixed an issue that happened when a filter for
Last-n-Recs was applied to a Group.
|
|
| 3.0.235
|
06/19/2007
|
|
|
LK-CMES - Made a small fix to make the LK-CMES
model work again.
|
|
| 3.0.234
|
06/15/2007
|
|
|
QC-CALC SPC - Added the Edit User Inputs
menu to the Report menu.
|
|
|
QC-CALC SPC - When using a Group the User Inputs
were not being used correctly.
|
|
| 3.0.233
|
06/11/2007
|
|
|
Metris CAMIO - Fixed the method of reading Angles to make them
bilateral instead of single-sided.
|
|
| 3.0.232
|
06/05/2007
|
|
|
Real-Time Exporting - Added the capability to export to StatGraphics.
|
|
|
Real-Time Exporting - Added the ability to use factors values
to create the file name for exporting. This has replaced the Use Part Name, Date,
and Time option.
|
|
|
Romer PowerINSPECT - The Prolink.VBS file is now copied
into the correct directory for the Romer interface.
|
|
| 3.0.231
|
05/31/2007
|
|
|
Real-Time Exporting - Added the ability to export to a second file
type automatically.
|
|
|
Werth - Fixed the Werth driver because of a file format change. They
changed the format of the Factors to include two @'s instead of one. Works with versions 5, 6, & 7.
|
|
|
Real-Time Exporting - Q-DAS True Position fields (K2008, K2030,
and K2031) are now being reported correctly.
|
|
|
Real-Time Reporting - Added the Range calculation to the list of
values sent to the Plot Report.
|
|
| 3.0.230
|
05/16/2007
|
|
|
SPC Reporting - Added Cpk_R, Cp_R, and Sigma_R to the list of
calculations sent to the reports for Control Charts.
|
|
|
View VMS/Voyager - Added the new VMS/Voyager version to the list of
auto-detected machines.
|
|
|
Metris Camio - Removed the date and time from the Metris file name.
|
|
|
Trend Analysis - Fixed Trend Analysis so it now works correctly with
deleted points.
|
|
|
QC-CALC Real-Time - When changing point values in the Point Properties
area and there is a Subgroup Size of 3, only the the new value for the third point was being
saved.
|
|
| 3.0.229
|
05/04/2007
|
|
|
Helmel Geomet - Added the Helmel Geomet machine interface.
|
|
|
QC-CALC Real-Time - Added an option to set the boundaries for
Pre-Control Zones as a percentage of the tolerances.
|
|
| 3.0.228
|
05/03/2007
|
|
|
Trend Analysis - Added an option to make the Assignable Causes
and Corrective Actions required. With this option the user cannot cancel out of the
Assignable Cause and Corrective Action assignment screens.
|
|
|
Real-Time Archiving - Fixed an issue where archiving would fail
when in Always Adapt mode and a dimension count mismatch happened during data collection.
|
|
| 3.0.227
|
05/02/2007
|
|
|
Metris Camio - Changes were made in the Metris Camio driver.
|
|
|
General Filtering - Fixed an issue where an error occured when
trying to cancel out of the ASK_VALUE filter window.
|
|
| 3.0.226
|
04/25/2007
|
|
|
QC-CALC Real-Time - A new option was added to copy the communication
files received from the inspection machine to a different directory after the files have been
processed.
|
|
|
EKRA - The EKRA interface now autodetects the c:\isys-vision\...
installation path.
|
|
|
BTU - Added Alarm & Alert Threshold to the BTU driver as a single-sided
dimension.
|
|
| 3.0.225
|
04/18/2007
|
|
|
Bytewise - The interfaces for Bytewise Profile360 and OLP were added.
|
|
|
BTU - Changed the BTU driver to force the nominal to be set to the value
of the actual that was received when the .qcc file is created.
|
|
|
General QC-CALC - An issue was fixed that occasionally caused the .qcc
files to be corrupted.
|
|
| 3.0.224
|
04/11/2007
|
|
|
Nikon i-NEXIV - The interface to i-NEXIV was added.
|
|
|
General QC-CALC - Sped up the Gather QC-CALC Information menu
process and also added a warning that it may take a little while to gather all the
necessary information.
|
|
|
Q-DAS Export - Fixed the output of the K2120 and K2121 fields for
Single-Sided Upper and Single-Sided Lower feature types.
|
|
| 3.0.223
|
04/02/2007
|
|
|
General Filtering - The description of the filter being sent to the reports
was not correct for the ASK_VALUE filter.
|
|
|
Brown & Sharpe PC-DMIS - Fixed a small bug in the new DIRECTORY command
of the PC-DMIS driver.
|
|
| 3.0.222
|
03/27/2007
|
|
|
Real-Time Exporting - The Mitutoyo MeasurLink exporting capability was added.
|
|
|
Brown & Sharpe PC-DMIS - Added the ability to save the .qcc file to the location
specified in the PC-DMIS communication file.
|
|
|
BTU - Improvements were made to the BTU interface to handle newer file formats.
|
|
|
QC-CALC Real-Time - The ReMeasure Record menu choice is now disabled if
the Subgroup Size in use does not equal 1.
|
|
|
QC-CALC Reporting - Fixed an issue with the Stat Summary report if you had a
large number of records with the same value in any dimension.
|
|
|
SPC Reporting - The Stat Summary report did not handle more that 32,000 records
correctly.
|
|
| 3.0.221
|
03/20/2007
|
|
|
Real-Time Exporting - Enabled the option for sending the Nominals and Tolerances
when exporting again.
|
|
|
SPC Reporting - In the Cpk report no values were being sent to the report for
the Shifted values if the dimension being process was toleranced as Single-Sided.
|
|
| 3.0.220
|
03/16/2007
|
|
|
General QC-CALC - Added more information to the Help - Gather QC-CALC
Information file to help with detecting problems. Also found the issue with including the Corrupt
File with the Gather file.
|
|
|
Real-Time Exporting - Fixed an issue with the Meta File exporting where the
counter was incremented incorrectly.
|
|
|
QC-CALC SPC - Fixed an issue that happened if someone minimized an Edit Data
screen inside of SPC and also minimized the Main SPC screen, then shut down SPC.
|
|
| 3.0.219
|
03/09/2007
|
|
|
EKRA X6 - Added the EKRA X6 interface.
|
|
|
QC-CALC Real-Time - Double clicking on a .qcc file now launches QC-CALC
Real-Time with that file open.
|
|
| 3.0.218
|
03/02/2007
|
|
|
General QC-CALC - Added more information to the Help - Gather QC-CALC
Information file to help with detecting problems.
|
|
|
Real-Time Reporting - Fixed an issue that would happen if a dimension had
no tolerances assigned, but not a Tolerance Type of Non-Toleranced.
|
|
| 3.0.217
|
02/26/2007
|
|
|
Real-Time Exporting - Minor changes were made to the Becker Quality
Solutions' Process Toolbox output.
|
|
|
QC-CALC SPC - The labels for the Tolerance values were changed in the
Quick Stats window. They now read Plus and Minus Tol instead of Upper and Lower Tol.
|
|
| 3.0.216
|
02/21/2007
|
|
|
General QC-CALC - Changed the maximum number of records allowed in a
database to 2,000,000.
|
|
|
Metris LK Camio - Made some adjustments to the CAMIO interface.
|
|
|
Data Collection - Any point received with 999999 as a value is now marked
as deleted. Previously the entire record was marked as deleted.
|
|
|
General QC-CALC - Fixed a few instances where the Cp value was calculated
without taking a single-sided Tolerance Type into account.
|
|
|
QC-CALC Real-Time - Fixed an issue that could happen with Point Properties
when switching to a new file that contains less records than the previous file.
|
|
| 3.0.215
|
02/14/2007
|
|
|
Real-Time Exporting - Minor changes were made to the Becker Quality
Solutions' Process Toolbox output.
|
|
|
MPM - We now handle blank lines in the C:\M_TESTS\index.txt file. This
is the file that tells us what machine diagnostic tests are available.
|
|
| 3.0.214
|
02/02/2007
|
|
|
Real-Time Exporting - The exporting format for Becker Quality
Solutions' Process Toolbox was added.
|
|
|
QC-CALC Real-Time - Added an INI override to test for values
outside of the specification limits for Single-Sided Tolerances.
|
|
|
QC-CALC Reporting - The DisplayPpk flag is now sent to the Raw
Data report in order to tell if the value should be displayed as Cpk or Ppk.
|
|
|
QC-CALC SPC - Fixed an issue that would happen if the user minimized
Edit Data and the QC-CALC SPC program, then shutdown QC-CALC SPC.
|
|
| 3.0.213
|
01/30/2007
|
|
|
QC-CALC Reporting - You can now insert fields for File Path and Name,
File Name, and Date into the subject and body of the email messages from reporting.
|
|
|
General QC-CALC - Increased the maximum number of records allowed in
the file from 100,000 to 1 million.
|
|
| 3.0.212
|
01/24/2007
|
|
|
QC-CALC SPC LITE - The Report menu is now an option in SPC enabling
the new QC-CALC SPC LITE product to be created.
|
|
|
QC-CALC SPC - Fixed an issue where files could not be Compacted or
Purged across the network from a computer running Windows XP.
|
|
|
General - The correct records are marked as deleted now when using
File - Modify Database Structure.
|
|
|
Mitutoyo GeoMeasure - Made a fix to the Mitutyo GeoMeasure driver.
|
|
| 3.0.211
|
01/17/2007
|
|
|
QC-CALC SPC - Added the dimension number to the dimension labels in
the list on the left side of the Edit - Nominals and Tolerances screen.
|
|
|
Data Collection - Fixed an issue that happened when using the
FactorN.txt file and there were not enough Text Factors in the file.
|
|
| 3.0.210
|
01/11/2007
|
|
|
Data Collection - Added the ability to get the Windows User ID
during the data collection process and save it as a Factor value.
|
|
|
Real-Time Exporting - Excel and Access exporting will now
automatically continue onto separate sheets when there are more than 200 Dimensions being
exported.
|
|
|
Zeiss Calypso - Made minor changes to the Zeiss Calypso driver in
order to handle periods in the file names.
|
|
| 3.0.209
|
01/08/2007
|
|
|
Q-DAS Exporting - Assignable Causes and Corrective Actions are now
exported to Q-DAS.
|
|
|
Zeiss Calypso - The Merge files produced by Calypso are now excluded from
the list of files to process during data collection.
|
|
| 3.0.206
|
12/21/2006
|
|
|
BTU - Made adjustments to the BTU driver.
|
|
|
Mitutoyo Roundness - Added more feature types to read in the Mitutory
Roundness driver.
|
|
|
MPM AccuFlex - Changed the front and rear squeegee constant values as
requested by MPM.
|
|
| 3.0.205
|
12/14/2006
|
|
|
QC-CALC Real-Time - The new AutoRefresh option is now
off by default.
|
|
|
QC-CALC Filtering - The last answer used for an Ask-Value
filter is now saved, so if that filter was applied when leaving the program the
same value is used when you restart the program.
|
|
|
QC-CALC Real-Time - Fixed a problem with the AutoRefresh
when the network disappeared and a problem with the plot scrolling unnecessarily.
|
|
| 3.0.204
|
12/11/2006
|
|
|
Q-DAS Data Collection - KField "K2022/0 #" now tells
us to apply the # as the precision for ALL dimensions.
|
|
|
Q-DAS Exporting - Fixed the Q-DAS configuration form
so that it always stays on top of the previous form.
|
|
| 3.0.203
|
12/08/2006
|
|
|
Taylor Hobson - Taylor Hobson machine interface added.
|
|
| 3.0.202
|
12/06/2006
|
|
|
Micro-Vu InSpec - Added Degrees-Min-Sec readability
to the Micro-Vu driver.
|
|
|
DataPage Exporting - Fixed a problem that would occur
occasionally when exporting to DataPage.
|
|
| 3.0.201
|
11/28/2006
|
|
|
Brown & Sharpe PC-DMIS - The PC-DMIS interface now assumes
that any new sales will be using the Transfer method to get data out of PC-DMIS
and into the C:\SPCData\ directory.
|
|
|
QC-CALC Real-Time - The Delete FactorN.txt option
now deletes any files that were used instead of just going up to Factor9.txt.
|
|
| 3.0.200
|
11/20/2006
|
|
|
Metris LK CAMIO - Made some adjustments for the new
CAMIO feature types.
|
|
|
QC-CALC SPC - Fixed a problem that happened sometimes
with Make ASCII.
|
|
| 3.0.199
|
11/13/2006
|
|
|
General QC-CALC - Made some improvements to handle a
large number (more than 32,768) of records in a file.
|
|
| 3.0.197
|
11/07/2006
|
|
|
Metris LK CAMIO - Added Metris CAMIO as a new model that
is supported.
|
|
|
Zeiss UMess - Made a few changes to Zeiss Umess interface
so we no longer require the numbers to be sequential.
|
|
| 3.0.196
|
11/03/2006
|
|
|
MPM AccuFlex - Adapted to handle Front and Rear
Squeegee correctly for version 8.5.
|
|
|
General QC-CALC - Added a new menu in order to run the
movie explaining the differences between the different QC-CALC versions. This
movie was previously part of the install process only.
|
|
| 3.0.195
|
10/30/2006
|
|
|
QC-CALC Reporting - Now sending the correct values for
Cp to the Raw Data report.
|
|
| 3.0.194
|
10/27/2006
|
|
|
QC-CALC Real-Time - The background color for a plot
with a trend detected is now purple.
|
|
|
Minitab Exporting - When Minitab is not detected
the export file is now created anyway.
|
|
|
Q-DAS Exporting - Returned the K1001 and K1002
fields to the way they used to be for exporting.
|
|
|
QC-CALC Real-Time - Fixed a problem with editing
factors in Point Properties when a filter is applied.
|
|
| 3.0.193
|
10/20/2006
|
|
|
Real-Time Exporting - Added exporting directly to Minitab
and automatically start the program if it is on the same computer.
|
|
|
QC-CALC Real-Time - Added an INI option to automatically
refresh the Real-Time screen after so many minutes.
|
|
|
Werth - Fixed a problem with picking up the file name
from Werth and an issue if the USER.INI file was not found.
|
|
| 3.0.192
|
10/17/2006
|
|
|
Werth - Added support for version 7 of the Werth software.
|
|
| 3.0.191
|
10/06/2006
|
|
|
QC-CALC Real-Time - Added an option to show a plot with
a trend on it with a different background color.
|
|
|
QC-CALC Real-Time - Fixed a problem that happened with
Point Properties if the number of available records was less than subgroup size.
|
|
|
QC-CALC Real-Time - Fixed a problem with Point Properties
if all records in the file are deleted in QC-CALC SPC and Point Properties was
open for that same file in QC-CALC Real-Time.
|
|
| 3.0.190
|
09/26/2006
|
|
|
Mitutoyo RoundPak - Added another element to read from
the Mitutoyo RoundPak gage.
|
|
| 3.0.189
|
09/25/2006
|
|
|
Detroit Precision Tool - Added the interface for Detroit
Precision Tool.
|
|
|
Windows 98 - Fixed a problem with reporting in Windows 98.
|
|
|
Zeiss Calypso - All header values sent from Calypso were
being put into Text Factors, instead of just the ones that are in the INI list.
|
|
| 3.0.188
|
09/22/2006
|
|
|
Reporting - In a Plot Report, a point that has an Assignable
Cause and/or Corrective Action assigned is now displayed in a different color.
|
|
|
QC-CALC Real-Time - A deleted point in the Xbar chart is now
also shown as a deleted point in the corresponding Range chart.
|
|
|
QC-CALC Real-Time - Added a menu for resetting Incrementing
Persistent Factors that were received from the inspection machine.
|
|
|
Mahr MMQ44 - One final adjustment to Mahr MMQ44 interface.
|
|
|
Filtering - The AskDate filter now works correctly when the
date format changes.
|
|
| 3.0.186
|
09/15/2006
|
|
|
Sheffield MeasureMax - When a custom ID command was being
used to send feature labels the label for a diameter was not being picked up.
|
|
| 3.0.185
|
09/14/2006
|
|
|
QC-CALC Real-Time - The information area in the lower left
corner of QC-CALC Real-Time now shows the Q-DAS source path when Q-DAS is the chosen
format.
|
|
|
EKRA - Changed source file name from cycle.dat to *.dat.
|
|
|
Adcole - Made the Q-DAS path the default path to use for Adcole.
|
|
|
General - Fixed a problem where starting one side of the program
(QC-CALC Real-Time) would ask for the other side of the program (QC-CALC SPC) to be shut down in
order to install an update. This was happening even when an update was not needed.
|
|
| 3.0.175
|
08/09/2006
|
|
|
Mahr MMQ44 - Added the Mahr MMQ44-R machine interface.
|
|
|
Valenite - Added the Valenite gage interface.
|
|
|
QC-CALC SPC Manual Entry Screen - Fixed a problem that happened
when minimizing the Manual Entry Screen.
|
|
| 3.0.183
|
09/08/2006
|
|
|
OGP MeasureMind, OGP MeasureX, and QVI BasicX/GageX - Added a
new DBSwitch that can be sent as the last line in the .sta file by sending the value
from the Header 5 line.
|
|
| 3.0.182
|
09/06/2006
|
|
|
Real-Time Exporting - Deleted values are no longer exported.
|
|
|
SPC Reporting - The first point for the Range Chart on
an Individual and Moving Range chart was not being set to 0.
|
|
| 3.0.181
|
08/31/2006
|
|
|
EKRA - All the EKRA models are now detected separately.
|
|
| 3.0.177
|
08/17/2006
|