HOW TO: Force QC-CALC Real-Time to start when computer starts
How to have QC-CALC Real-Time start when Windows logs in
Print Friendly View
written: 07/17/2012
last modified: 04/08/2024

INTRODUCTION

Follow the steps below to set QC-CALC Real-Time to start when the computer is restarted.



STEPS

  1. In QC-CALC Real-Time go to the Tools - Options - Global area.
  2. In the Startup area click the Set button. This will place a shortcut to QC-CALC Real-Time in the startup folder so that QC-CALC Real-Time will be run every time the computer is started.
  3. Click OK on the Options screen and you are finished.

Applies To

GageStation v.4.10
GageStation v.4.00
GageStation v.3.40
QC-CALC Real-Time v.4.10
QC-CALC Real-Time v.4.00
QC-CALC Real-Time v.3.40

Category

General Program Information
See more articles in this category