Search for articles by entering criteria in the fields below and clicking Search.  
Try our Article Browser to narrow your search results by clicking on Product and Category groups.

Results >>
Knowledge Base Article
 Creating QR Codes for use with QC-Mobile
  PREREQUISITES
ERS 3.4 and QC-Mobile 4.0.

 Running QC-CALC 4.0 on a network
  PREREQUISITES

The PC connected to your insp...
 Speed Test Application
  

 

Resetting and Troubleshooting Administrative Tools in QC-Calc Real-Time 4.0
  
INTRODUCTION
Have QC-Calc Real-Time 4.0 installed...
 Considerations for Upgrading to 4.0
  

Why Upgrade to 4.0 

Although QC-CALC, QC...
 Upgrading QC-CALC to version 4.0
  PREREQUISITES
  • If you are running a version of QC-CALC...
 Upgrading QC-Gage to version 4.0
  
PREREQUISITES

QC-Gage 3.4

...
 Upgrading SPC Office Buddy to version 4.0
  PREREQUISITES

SPC Office Buddy 3.4

INTRODUCTION...
 Gagestation/QC-Gage 4.0 System Requirements
  GageStation 4.0 System Requirements

To run...
 QC-CALC 4.0 System Requirements
  QC-CALC 4.0 SYSTEM REQUIREMENTS
To run QC-CALC, you ...
 SPC Office Buddy 4.0 System Requirements
  SPC Office Buddy 4.0 SYSTEM REQUIREMENTS
To run SPC ...
 Why upgrade to 4.0?
  QUESTION

Why should I upgrade to the 4.0 version of QC-CALC, QC-Gage...
 What are all those file extensions in QC-CALC?
  QUESTION

Along with the QCC file, there are other fil...
 Saving and Running Spec Plans from your Network
  QUESTION

How can I save and run Spec Plans from my network without a...
 EDL 3.3 Best Practices #1-4
  This article will go through some of the best practices when setting up EDL for the first time on yo...
 EDL 3.3 Best Practices #5-8
  This is a continued list of Best Practices for EDL 3.3.

#5 - PERFORMANCE SETTINGS...
 Not seeing mapped drive letters in QC-CALC, EDL, or ERS
  SYMPTOM

When browsing to file locations in QC-CALC, EDL, and ERS, mapped...
 Cannot open EDLLoadService service on computer '.'.
  SYMPTOM

You attempt to click just about anything in the Enterprise D...
 HOW TO: Force QC-CALC Real-Time to start when computer starts
  INTRODUCTION
Follow the steps below to set QC-CALC Real-Time to start when t...
 What are all those file extensions in QC-Gage?
  QUESTION

What are all those file extensions in QC-Gage?

...
 QC-CALC Real-Time Maximized on Right Monitor
  QUESTION
I want to have QC-CALC Real-Time open Maximized on my right monitor ins...
 Password Protecting Menus in QC-CALC
  PREREQUISITES QC-CALC 3.0, QC-Gage 3.0 or newer. INTRODUCTIONTh...
 FAQ: I don't see the Tools > Password menu. Where is it? (ver. 3.2 or higher)
  QUESTION

I tried to password protect some of the functionality in QC-C...
 HOW TO: Set the Width of Text Factors
  INTRODUCTION
HOW TO: Set the Width of Text Factors There are 2 places that yo...
 Running QC-CALC on a network
  PREREQUISITES

The PC connected to your inspection machine (CMM, Vision...
 Monitoring with QC-CALC SPC
  PRE-REQUISITES
You should be running QC-CALC Real-Time and QC-CALC SPC on a ne...
 HOW TO: Save all SPC data to your Server.
  INTRODUCTION
How and why should I save all my data to a server?  &...
 Initial Password in QC-CALC (ver. 3.0)
  QUESTION
How do I set the password the first time if I don't know the initial ...
 Forgotten or Misplaced Passwords in QC-CALC or QC-Gage (ver. 3.0 or higher)
  ISSUE

You have set the password in QC-CALC to lock down certain m...
 Why do I have to keep resetting the same properties every time a new database is created?
   Why do I have to keep resetting the same properties every time a new database is created? Whe...
 Earlier Versions of QC-CALC seem simpler to use. (ver. 3.0 - 3.3)
  SYMPTOM

Earlier versions of QC-CALC seem easier to use than the curren...
 
Tutorials
 The Administrative Tool Explained
  As of QC-CALC version 3.2, an Administrative Tool was added to help control every c...
 Getting Started with QC-CALC
  This tutorial introduces the Training CMM tool that is shipped and installed with QC-CALC. The Trai...
 
White Papers
 4.0 Data Converter
  When moving from 3.x to 4.0 existing .QCC files will need to be converted to either SQL Server or .Q...
 Dimension Filter based Data Group
  
It is very easy to accidentally set up Dimension and Record Filters so they only get data from ...
 ERS – Creating and Understanding Local Users
   HOW TO: Reconnect Mapped Drives at Startup
  Many users experience problems with mapped network drives. The mapped drives do not reconnect corr...
 QC-CALC Real-Time 3.3 Training Manual
  This is the training manual for the 3.3 version of QC-CALC Real-Time.
 QC-CALC SPC 3.3 Training Manual
  This is the training manual for the 3.3 version of QC-CALC SPC.
 True Position in QC-CALC Explained
  This White Paper explains the contents of the True Position graphs, how to configure a True Position...
 Modify Database Structure
  
 Merging Data Files
  There are times machine data ends up in separate .qcc files (mostly due to receiving a different num...
 Using Convert 3.2
  This white paper will instruct you on using the Convert 3.2 program to modify the structure of QCC d...
 The Administrative Tool Explained
  Historically, QC-CALC Real-Time has been used within an individual inspection machine as a single co...
 Email Notification for Out of Specification Points
  Are you running parts without an operator present and need to have someone notified when a par...
 Grouping in SPC
  

If you wanted to run a single report on multiple QCC files all at once we offer a feature called ...

 Monitoring the Active Part in Another Location
  Viewing Real-Time SPC charts in multiple locations can be very useful. This article explains how QC-...