QC-CALC Real-Time Maximized on Right Monitor
Print Friendly View
written: 03/09/2011
last modified: 03/27/2024

I want to have QC-CALC Real-Time open Maximized on my right monitor instead of the main monitor. How do I do this?

To move QC-CALC Real-Time to the right monitor and having it open full screen follow these steps:

  1. If QC-CALC Real-Time is maximized on the main monitor, make it not maximized.
  2. Drag the main QC-CALC Real-Time screen to the right monitor.
  3. Shut off QC-CALC Real-Time to save the right monitor setting.
  4. Start QC-CALC Real-Time again and it should appear on the right monitor.
  5. Maximize the program.
  6. When you shut the program down again next time it will reopen as maximized on the right monitor the next time you start it.

The Tools - Options - Miscellaneous - Start QC-CALC Real-Time setting must be set to Normal in order for this to work. The Maximized setting in this area will only maximize the program on the main monitor.

Applies To

QC-CALC Real-Time v.4.10
QC-CALC Real-Time v.3.30
QC-CALC Real-Time v.3.20


General Program Information
See more articles in this category