QC-Gage and QC-CALC Gage Central are not communicating.
These are directions for syncing the communication between QC-Gage and QC-CALC Real-Time.
Print Friendly View
written: 11/10/2006
last modified: 03/15/2024

SYMPTOM
QC-Gage and QC-CALC Gage Central are both installed on the same computer, but data is not being sent from QC-Gage to QC-CALC Gage Central.


SOLUTION
Explicitly tell QC-Gage where to send the data, and tell QC-CALC to look in the same location.



STEPS

  1. In QC-Gage, click on the QC-CALC - Set Data Output Path menu.
  2. Set the value to "C:\Prolink\QC-CALC 3.0\Data\qc.sta"
  3. Open the Real-Time half of the QC-CALC Gage Central software.
  4. Now click on Tools - Options - Data Collection - Data Source Information.
  5. Set the File Path and Name to "C:\Prolink\QC-CALC 3.0\Data\qc.sta"

Applies To

QC-Gage v.3.00

Category

Data Collection
See more articles in this category