QC-CALC is missing some features
What to do if features from your inspection program are missing in QC-CALC
Print Friendly View
written: 01/30/2006
last modified: 09/16/2024

SYMPTOM
You don’t get some features into QC-CALC

CAUSE
There are several conditions that could prevent features in your inspection program from showing up in QC-CALC. You may have forgotten to give the feature a name or give it valid nominal and tolerance values, all required by QC-CALC. Some inspection machines require you to mark a feature for statistics.

RESOLUTION

  1. Make sure all features are named.
  2. Make sure all features have valid nominals and tolerances
  3. Check the feature in your inspection software and make sure Plus Tolerance - Minus Tolerance is greater than zero, and make sure the feature is selected for statistics if your machine requires that.

Applies To

QC-CALC Real-Time v.3.3
QC-CALC Real-Time v.3.2
QC-CALC Real-Time v.3.0

Category

Data Collection
See more articles in this category