Corrupt data in HyperTerminal
This explains ideas for fixing Hyperterminal issues.
Print Friendly View
written: 02/01/2006
last modified: 03/14/2024


Sometimes I get data from HyperTerminal but sometimes the data in HyperTerminal is corrupt


  1. You may have a poorly shielded cable, electrical noise, or improper grounding.
  2. The gage may be switching output modes.


  1. Try using a different computer.
  2. See if there is a pattern to the occurrence of bad data, perhaps a certain series of key strokes changes the gage mode.

Applies To

QC-Gage v.3.00
QC-Gage v.1.96
QC-Gage v.1.91


Data Collection
See more articles in this category